D-S12S | APM Applications & Instrumentation
Click to zoom in

D-S12S

Have Questions?

  • Onsite Training*

  • Contact For A Free Quote

  • Added Value

  • Wordwide Delivery

Submersible Level Transmitter with Silicon sensor and SDI-12 

  1. Highly stable piezo-resistive pressure sensor
  2. Accuracy: <±0.1% FS Total Error
  3. Ranges from 0.5mWG to 100mWG
  4. Gauge, Sealed Gauge or Absolute reference
  5. Level and Temperature output as standard 

The S12S hydrostatic submersible level transmitter, has a stainless steel piezo-resisitive silicon pressure sensor offering the ability to measure low pressure ranges from as little as 0.5mWG to be measured accurately. The use of a silicon sensor improves the resolution and stability of the device and offers a higher level of overall accuracy compared to other sensing technologies. Every device is temperature compensated and calibrated and supplied with a traceable serial number and calibration certificate. The electronics incorporate a microcontroller-based electronics circuit, this means there are no adjusting pots and therefore the electronics are very stable. Every device is compensated and calibrated to a total error band of <±0.1% over -5 to +45°C. As well as the level measurement the device outputs the temperature value also. 

The options available on the S12S Level transmitter include the following

  1. Pressure range and engineering units
  2. Pressure reference (G, SG or Abs)
  3. Cable material
  4. O ring seal material

Suitable for the following applications

  1. River and reservoir level
  2. Tank and vessel level
  3. Borehole level
  4. Environmental monitoring
  5. V-notch weir flow measurement
Read More
Read Less
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Your cart

×